2D Geometry

Capabilities / Power management

Years from a small battery.

Regulators, start-up and wake-up circuits that keep every block supplied, and let a device run for years on a small battery.

CategoryPower
IncludesRegulators, references, power-on reset, power control
Found inAtmospheric and robotics chips

Overview

Why it matters.

A battery slowly loses voltage as it drains, and gets weaker in the cold. Meanwhile every block on the chip needs a steady, clean supply, and only when it is actually working.

Power management is the circuitry that bridges the two. It turns a changing battery into stable supplies, starts the chip up cleanly every time, and switches blocks on and off so that almost no energy is spent while the device waits.

What we design

The building blocks.

Regulators

Turn a changing battery voltage into steady supplies for each block.

References

Stable voltages that the regulators and measurements are built on.

Power-on reset

Makes sure the chip starts up in a known, safe state, every time.

Power control

Turns blocks on only when they are needed, and off again.

Design priorities

What we design for.

01

Long life

Runs for years on a small battery.

02

Clean supplies

Quiet power for sensitive circuits.

03

Reliable start-up

Starts the same way, every time.

04

Wide range

Works as the battery drains and the cold sets in.

In our chips

Where you'll find it.

Need this in your chip?

Tell us what your product has to sense, time or control.

Technologies

The other building blocks.