2D Geometry

Work / Atmospheric sensing

A weather instrument on one chip.

Atmospheric sensing system-on-chip. It measures the air, knows where it is and radios the data down, from one die light enough for a weather balloon to carry.

TypeMixed-signal system-on-chip
MeasuresPressure, temperature, humidity, position
Built forBalloon-borne weather instruments
StatusIn design

Overview

Why one chip.

Every day, weather services around the world launch balloons that carry small instruments up through the atmosphere. Each one measures the air as it climbs, tracks its position and sends everything back by radio until the balloon bursts high above the clouds.

Today those instruments are built from a board full of separate parts. We are putting the whole instrument on a single chip: the sensor electronics, the positioning receiver, the radio, the clocks and the power management. One chip means a lighter, cheaper and lower-power instrument that keeps working through the deep cold of the upper atmosphere.

On the chip

What's inside.

Sensor interfaces

Read pressure, temperature and humidity sensors and turn them into accurate numbers.

Precision reference

A stable on-chip reference that every measurement is made against.

Positioning receiver

Tracks satellite positioning signals, so every reading comes with where it was taken. Wind is measured from how the balloon moves.

Radio link

Sends the data down to the ground station, with a driver for an external amplifier when more range is needed.

Wake-up receiver

Listens for a command while drawing almost no power, so the instrument can sleep until it is needed.

Clocks

A crystal oscillator, an on-chip oscillator and a real-time clock keep the radio, receiver and log on time.

Power management

Runs from a small battery, starts up cleanly and keeps every block supplied as the battery and temperature change.

Digital control

Sequences the measurements, packages the data and runs the radio.

Key features

Designed for the flight.

01

One die

Sensing, positioning, radio, timing and power in a single part.

02

Built for the cold

Designed to keep working from the ground to the frozen upper atmosphere.

03

Low power

Runs a full flight from a small battery.

04

Light and low cost

Fewer parts for an instrument that flies once.

Applications

Where it flies.

Weather forecasting

Upper-air soundings that feed the daily forecast.

Climate research

Long-term records of the atmosphere, layer by layer.

Environmental monitoring

Low-cost sensing wherever the air needs to be measured.

Progress

Where we are.

01

Specification

02 · Now

Design

03

Verification

04

Layout

05

Silicon

Building weather instruments?

We'd like to hear what your next instrument needs.

More chips

Also in design.